FixVault
Home › Mazda › 2003 › MPV LX › Repair and Diagnosis › Restraints › Restraints Control Systems › Seat Belt System › Buckle Switch Inspection › Driver's Seat

Driver's Seat

  1. Disconnect the buckle switch connector.
  2. Inspect for continuity between the buckle switch terminals using an ohmmeter.
    • If not as specified, replace the front buckle.
      Fig 1: Inspecting Buckle Switch Continuity (1 Of 2)
      G01883889Courtesy of MAZDA MOTORS CORP.
      Fig 2: Inspecting Buckle Switch Continuity (2 Of 2)
      G01883890Courtesy of MAZDA MOTORS CORP.
About FixVault