FixVault
Home › Mazda › 2003 › Protege ES, Standard › Repair and Diagnosis › Heating, Ventilation & A/C (HVAC) › HVAC Control Systems › Control System (HVAC) › Condenser Fan Removal/Installation

Condenser Fan Removal/Installation

  1. Disconnect the negative battery cable.
  2. Remove the fresh-air duct.
  3. Remove in the order indicated in the illustration.
    Fig 1: Removing Condenser Fan
    G01914703Courtesy of MAZDA MOTORS CORP.
    Fig 2: Condenser Fan Removing Order Chart
    G01914702Courtesy of MAZDA MOTORS CORP.
  4. Install in the reverse order of removal.
About FixVault