FixVault
Home › Mazda › 2003 › Protege5 Automatic › Repair and Diagnosis (Single Page) › Engine Mechanical › Mechanical › Engine Mechanical Service Information › Compression Inspection › Compression

Compression Inspection: Compression

Fig 1: Engine Compression Pressure Specification
G01913327Courtesy of MAZDA MOTORS CORP.
  1. Disconnect the compression gauge.
  2. Install the spark plugs.

    Tightening torque 

    15-22 N.m {1.5-2.3 kgf.m, 11-16 ft.lbf} 

  3. Connect the ignition coil connector.
  4. Install the fuel pump relay.
About FixVault