FixVault
Home › Mazda › 2003 › Protege5 Standard › Repair and Diagnosis › Restraints › Restraints Control Systems › Seat Belt System › Child Restraint Seat Anchor Removal/Installation › Tether Anchor › 4SD

Tether Anchor: 4SD

  1. Remove the rear package trim.
  2. Remove the bolt, then child restraint seat anchor.
  3. Install in the reverse order of removal.
    Fig 1: Removing Bolt And Child Restraint Seat Anchor (4SD)
    G01914885Courtesy of MAZDA MOTORS CORP.
About FixVault