FixVault
Home › Mazda › 2003 › Protege5 Standard › Repair and Diagnosis › Steering › Power Steering › Power Steering System › Pinion Shaft and Housing Component Disassembly Note › Holder Disassembly Note

Holder Disassembly Note

  1. Cut away the staked area using a drill.
    CAUTION:
    • Carefully pull the holder out without damaging the U-gasket.
    Fig 1: Disassembling Holder (1 Of 2)
    G01914578Courtesy of MAZDA MOTORS CORP.
  2. Disassemble the holder using the SST. 
    Fig 2: Disassembling Holder (2 Of 2)
    G01914579Courtesy of MAZDA MOTORS CORP.
About FixVault