Power Outside Mirror Switch Removal/Installation

WARNING: This page is about a different car, the 2003 Mazda Protege5 and 2003 Mazda Protege. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the negative battery cable.
Remove the driver-side front door trim. (See FRONT DOOR TRIM REMOVAL/INSTALLATION .)
Push the clip from the reverse side of the trim to remove the switch panel.
Disconnect the connector.
Remove the screws, and then remove the power outside mirror switch.

Fig 1: Removing Power Outside Mirror Switch
Courtesy of MAZDA MOTORS CORP.
Install in the reverse order of removal.