Front Power Window Regulator Removal/Installation
WARNING: This page is about a different car, the 2003 Mazda Protege5 and 2003 Mazda Protege. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the negative battery cable.
- Remove the front door glass. (See FRONT DOOR GLASS AND GUIDE REMOVAL/INSTALLATION .)
- Disconnect the front power window regulator connector.
- Remove the bolts and the nuts, then remove the front power window regulator.
Tightening torque
6.87-9.80 N.m (60.8-86.7 in.lbf)
- Install in the reverse order of removal.