FixVault
Home › Mazda › 2004 › 3 i, Automatic › Repair and Diagnosis › Accessories & Equipment › Entertainment Systems › Entertainment System › Condenser Removal/Installation

Condenser Removal/Installation

  1. Disconnect the negative battery cable.
  2. Remove the liftgate upper trim. (See LIFTGATE UPPER TRIM REMOVAL/INSTALLATION .)
  3. Remove in the order indicated in the table.
    REMOVAL ORDER OF CONDENSER

    1 Bolt
    2 Connector
    3 Condenser
  4. Install in the reverse order of removal.
    Fig 1: Removing/Installing Condenser
    G02566645Courtesy of MAZDA MOTORS CORP.
About FixVault