FixVault
Home › Mazda › 2004 › 3 i, Automatic › Repair and Diagnosis › Body & Frame › Ignition Switch/Steering Lock › Power Systems › Ignition Switch Removal/Installation › Notes

Ignition Switch Removal/Installation: Notes

  1. Disconnect the negative battery cable.
  2. Remove the column cover. (See COLUMN COVER REMOVAL/INSTALLATION .)
  3. Remove in the order indicated in the table.
    Fig 1: Removing/Installing Ignition Switch
    G00974184Courtesy of MAZDA MOTORS CORP.
    Fig 2: Ignition Switch Removal Sequence
    G00974185Courtesy of MAZDA MOTORS CORP.
  4. Install in the reverse order of removal.
About FixVault