FixVault
Home › Mazda › 2004 › 6 i, 4D Hatchback, Automatic › Repair and Diagnosis › Engine Performance › System › Engine Control System (L3) › Neutral Switch Inspection › Continuity Inspection › Notes

Continuity Inspection: Notes

  1. Disconnect the negative battery cable.
  2. Remove the neutral switch.
  3. Inspect for continuity between the neutral switch terminals using an ohmmeter.
    • If the neutral switch is okay, but PID value is out of specification, perform the CIRCUIT OPEN/SHORT INSPECTION .
    • If not as specified, replace the neutral switch.
About FixVault