FixVault
Home › Mazda › 2004 › 6 i, 4D Hatchback, Standard › Repair and Diagnosis (Single Page) › Engine Performance › System › On-Board Diagnostic [Engine Control System L3) › On-Board Diagnostic Test › Freeze Frame PID Data Access Procedure

Freeze Frame PID Data Access Procedure

  1. Perform the necessary vehicle preparation and visual inspection.
  2. Connect WDS or equivalent to the vehicle DLC-2 16-pin connector located at the left side of the center console.
  3. Record the FREEZE FRAME PID DATA by WDS or equivalent. See Figure
About FixVault