FixVault
Home › Mazda › 2004 › 6 s, 4D Hatchback, Automatic › Repair and Diagnosis › Engine Performance › System › On-Board Diagnostic [Engine Control System AJ) › On-Board Diagnostic Test › PID/Data Monitor & Record Procedure

PID/Data Monitor & Record Procedure

  1. Perform the necessary vehicle preparation and visual inspection.
  2. Connect the WDS or equivalent to the vehicle DLC-2 16-pin connector located on the left side of the center console. See Figure.
  3. Access and monitor PIDs using the WDS or equivalent.
About FixVault