FixVault
Home › Mazda › 2004 › MPV ES › Repair and Diagnosis › Engine Mechanical › Mechanical › Engine Mechanical (Service Information) › Timing Chain Removal/Installation › Engine Front Cover Installation Note

Engine Front Cover Installation Note

  1. Apply a 6 mm {0.24}  dot of silicone sealant at the indicated location.
    Fig 1: Locating Areas For Silicon Sealant Application
    G00993532Courtesy of MAZDA MOTORS CORP.
  2. Install the remaining bolts and studs, and then tighten all bolts and studs in the order shown.
    Fig 2: Engine Front Cover Bolt & Stud Tightening Sequence
    G00993533Courtesy of MAZDA MOTORS CORP.
About FixVault