Circuit Open/Short Inspection: Notes
WARNING: This page is about a different car, the 2005 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the PCM connector. (See PCM REMOVAL/INSTALLATION .)
- Connect the SST (104 Pin Breakout Box) to the PCM disconnected.
- Tighten the connector attaching bolt.
Tightening torque
- 7.9-10.7 N.m {80-110 kgf.cm, 69.5-95.4 in.lbf}
- Inspect the following wiring harness for open or short (Continuity check).