FixVault
Home › Mazda › 2004 › MPV ES › Repair and Diagnosis › External Pages › Different car › Section 43 (Air Bag System) › Disposal Procedures › Inspecting Deployment Tool

Inspecting Deployment Tool

WARNING: This page is about a different car, the 2002 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Deployment tool should always be inspected for proper operation before deploying air bag.
  1. Connect Red deployment tool clip to positive battery terminal. Connect Black deployment tool clip to negative battery terminal. Observe deployment tool lights. Green light should be on with Red light off.
  2. Connect deployment tool connector "A" to connector "B". See Figure. Green light should be off with Red light on. Press deployment tool activation switch. Green light should be on with Red light off.
  3. If deployment tool lights function as described, it is safe to use deployment tool to activate air bag. If deployment tool lights DO NOT function as described, DO NOT use deployment tool. Replace deployment tool with another unit and repeat procedure.
About FixVault