FixVault

Front Blower Relay Removal/Installation

NOTE:
  • Because the lock section of the unit is damaged easily, do not remove the remove the front blower relay from the bracket unless replacement is necessary. Always perform an inspection of the front blower relay before removal.
  1. Disconnect the negative battery cable.
  2. Remove in the order indicator in the illustration.
    Fig 1: Removal Order Of Front Blower Relay
    G00992174Courtesy of MAZDA MOTORS CORP.
    Fig 2: Removing/Installing Front Blower Relay
    G00992175Courtesy of MAZDA MOTORS CORP.
  3. Install in the reverse order of removal.