FixVault
Home › Mazda › 2004 › MPV ES › Repair and Diagnosis › Heating, Ventilation & A/C (HVAC) › HVAC Control Systems › HVAC System › Control System › Rear Resistor Removal/Installation

Rear Resistor Removal/Installation

  1. Disconnect the negative battery cable.
  2. Remove the rear side trim (RH). (See REAR SIDE TRIM REMOVAL/INSTALLATION .)
  3. Remove in the order indicated in the illustration.
    Fig 1: Removing Order Of Rear Resistor
    G00992142Courtesy of MAZDA MOTORS CORP.
    Fig 2: Removing/Installing Rear Resistor
    G00992143Courtesy of MAZDA MOTORS CORP.
  4. Install in the reverse order of removal.
About FixVault