FixVault
Home › Mazda › 2004 › MX-5 Miata Base, Automatic › Repair and Diagnosis (Single Page) › Accessories & Equipment › Headlights › Lighting System › Flasher Control Module Removal/Installation

Flasher Control Module Removal/Installation

  1. Disconnect the negative battery cable.
  2. Remove the lower panel.
  3. Remove in the order indicated in the table.
    REMOVAL ORDER OF FLASHER CONTROL MODULE

    Removal Order Component
    1 Connector
    2 Flasher control module
  4. Install in the reverse order of removal.
    Fig 1: Removing/Installing Flasher Control Module
    G02560471Courtesy of MAZDA MOTORS CORP.
About FixVault