FixVault
Home › Mazda › 2004 › MX-5 Miata Base, Automatic › Repair and Diagnosis › Restraints › Restraints Control Systems › Seat Belt System › Buckle Removal/Installation

Buckle Removal/Installation

  1. Disconnect the negative battery cable.
  2. Disconnect the buckle switch connector.
  3. Remove the bolt, then remove the buckle.
  4. Install in the reverse order of removal.
    Fig 1: Removing/Installing Buckle
    G00989024Courtesy of MAZDA MOTORS CORP.
About FixVault