FixVault
Home › Mazda › 2004 › MX-5 Miata Base, Standard › Repair and Diagnosis › Engine Performance › System › On-Board Diagnostic (Engine Control System BP, BP With TC] › After Repair Procedure

After Repair Procedure

  1. Connect WDS or equivalent to the vehicle DLC-2 16-pin connector located the left side of the center console.
    Fig 1: Locating DLC-2
    G00989175Courtesy of MAZDA MOTORS CORP.
  2. Turn the ignition key from OFF to ON.
  3. Record DTC if retrieved.
  4. Erase all diagnostic data by WDS or equivalent
About FixVault