FixVault
Home › Mazda › 2004 › MX-5 Miata Base, Standard › Repair and Diagnosis › Steering › Steering Column › Power Steering System › Steering Gear And Linkage Disassembly/Assembly › Holder Assembly Note

Holder Assembly Note

  1. Apply grease to the U-gasket and O-ring.
  2. Assemble the U-gasket and O-ring into the holder.
  3. Assemble the holder using the SST. 
    Fig 1: Assembling Holder Using Special Service Tool
    G00997858Courtesy of MAZDA MOTORS CORP.
  4. Stake the holder to the cylinder using a punch.
    Fig 2: Staking Holder To Cylinder
    G00997859Courtesy of MAZDA MOTORS CORP.
About FixVault