FixVault
Home › Mazda › 2004 › RX-8 1.3 3 › Repair and Diagnosis (Single Page) › Accessories & Equipment › Headlights › Lighting System › DRL Control Module Removal/Installation

DRL Control Module Removal/Installation

  1. Disconnect the negative battery cable.
  2. Disconnect the connectors.
  3. Remove the screw and then remove the DRL control module.
  4. Install in the reverse order of removal.
    Fig 1: Removing/Installing DRL Control Module
    G01344586Courtesy of MAZDA MOTORS CORP.
About FixVault