FixVault
Home › Mazda › 2004 › RX-8 1.3 3 › Repair and Diagnosis › Body & Frame › Door Locks › Security System And Locks System › Front Inner Handle Removal/Installation

Front Inner Handle Removal/Installation

  1. Remove the inner garnish. (See INNER GARNISH REMOVAL/INSTALLATION .)
  2. Remove the front door trim. (See FRONT DOOR TRIM REMOVAL/INSTALLATION .)
  3. Remove the screws, then remove the front inner handle.
    Fig 1: Removing/Installing Front Inner Handle
    G01344385Courtesy of MAZDA MOTORS CORP.
  4. Detach the cables from the front inner handle and door lock knob.
  5. Install in the reverse order of removal.
About FixVault