FixVault
Home › Mazda › 2004 › RX-8 1.3 3 › Repair and Diagnosis › Body & Frame › Door Locks › Security System And Locks System › Trunk Key Cylinder Removal/Installation

Trunk Key Cylinder Removal/Installation

  1. Disconnect the negative battery cable.
  2. Remove the trunk end trim. (See TRUNK END TRIM REMOVAL/INSTALLATION .)
  3. Detach the rod.
    Fig 1: Removing/Installing Trunk Key Cylinder
    G01344437Courtesy of MAZDA MOTORS CORP.
  4. Remove the nuts, then remove the trunk key cylinder.
  5. Install in the reverse order of removal.
About FixVault