FixVault
Home › Mazda › 2004 › RX-8 1.3 3 › Repair and Diagnosis › Electrical › Horns › Instrumentation/Driver Info › Information Display Removal/Installation

Information Display Removal/Installation

  1. Disconnect the negative battery cable.
  2. Remove the lower panel. (See LOWER PANEL REMOVAL/INSTALLATION .)
  3. Remove the console. (See CONSOLE REMOVAL/INSTALLATION .)
  4. Remove the center panel module. (See CENTER PANEL MODULE REMOVAL/INSTALLATION .)
  5. Remove the LCD unit. (See LCD UNIT REMOVAL/INSTALLATION
  6. Remove in the order indicated. See Fig 1.
    Fig 1: Removal Order Of Information Display
    G01344802Courtesy of MAZDA MOTORS CORP.
  7. Install in the reverse order of removal.
    Fig 2: Removing/Installing Information Display
    G01344803Courtesy of MAZDA MOTORS CORP.
About FixVault