FixVault
Home › Mazda › 2004 › RX-8 1.3 3 › Repair and Diagnosis › Engine Performance › Tune-Up › Ignition System › High-Tension Lead Inspection

High-Tension Lead Inspection

  1. Remove the high-tension lead. (See HIGH-TENSION LEAD REMOVAL/INSTALLATION .)
  2. Measure the resistance using a tester.
    • If not within the specification, replace the high-tension lead. 

    Resistance 

    1.0-4.0 kilohms [20 °C {68 °F}] 

About FixVault