FixVault
Home › Mazda › 2004 › RX-8 1.3 3 › Repair and Diagnosis › Restraints › Restraints Control Systems › Seat Belt System › Front Buckle Switch Inspection › Passenger-Side

Front Buckle Switch Inspection: Passenger-Side

  1. Disconnect the negative battery cable.
  2. Disconnect the buckle switch connector.
  3. Verify continuity as indicated. See Fig 1.
    • If not as indicated, replace the front buckle.
    Fig 1: Continuity Check Between Terminals Of Connector
    G01346300Courtesy of MAZDA MOTORS CORP.
    Fig 2: Checking Continuity Between Terminals Of Connector
    G01346301Courtesy of MAZDA MOTORS CORP.
About FixVault