FixVault
Home › Mazda › 2004 › RX-8 1.3 N › Repair and Diagnosis › Engine Performance › Engine Control Systems › Eccentric Shaft Position Sensor Inspection › Circuit Open/Short Inspection › Notes

Circuit Open/Short Inspection: Notes

  1. Disconnect the PCM connector.
  2. Disconnect the eccentric shaft position sensor connector.
  3. Inspect the following wiring harnesses for open or short circuit. (Continuity inspection)
    Fig 1: Disconnecting Eccentric Shaft Position Sensor Connector
    G03702097Courtesy of MAZDA MOTORS CORP.
About FixVault