FixVault
Home › Mazda › 2004 › RX-8 1.3 N › Repair and Diagnosis › Engine Performance › System › On-Board Diagnostic (Engine Control System 13BMSP] › On-Board Diagnostic Test › Diagnostic Monitoring Test Results Access Procedure

Diagnostic Monitoring Test Results Access Procedure

  1. Perform the necessary vehicle preparation and visual inspection.
  2. Connect the WDS or equivalent to the vehicle DLC-2 16-pin connector located in the driver compartment.
  3. Access to the diagnostic monitoring test results and read the test results using the WDS or equivalent.
    Fig 1: Accessing Diagnostic Monitoring Test Results
    G01345155Courtesy of MAZDA MOTORS CORP.
About FixVault