FixVault
Home › Mazda › 2004 › Tribute DX, FWD › Repair and Diagnosis › Engine Performance › System › Engine Control System › Clutch Pedal Position (CPP) Switch › Removal & Installation

Removal & Installation

  1. Disconnect the clutch pedal position (CPP) electrical connector.
    Fig 1: Identifying CPP Electrical Connector
    G00984966Courtesy of MAZDA MOTORS CORP.
  2. Remove the CPP locknut and the switch.
    Fig 2: Identifying CPP Locknut
    G00984967Courtesy of MAZDA MOTORS CORP.
  3. To install, reverse the removal procedure.
About FixVault