FixVault
Home › Mazda › 2004 › Tribute ES, FWD › Repair and Diagnosis › External Pages › Different car › Section 492 (Fuel System) › Quick Release Coupling - Locking Tab › Connect

Quick Release Coupling - Locking Tab: Connect

WARNING: This page is about a different car, the 2005 Mazda Tribute. However, it is still accessible from the selected car via links, so may be relevant.
  1. Clean and inspect the fitting and the tube for damage. Remove any foreign material or obstructions.
    NOTE:
    • Make sure the collar on the fuel tube is fully inserted into the quick connect coupling before the locking tab is locked.
    NOTE:
    • Apply clean engine oil to the end of the tube before inserting it into the connector.
  2. Connect the fuel or vapor tube quick connect coupling.
    1. Connect the quick connect coupling to the tube.
    2. Press the quick connect coupling locking tab into position.
    Fig 1: Connecting Fuel Or Vapor Tube Quick Connect Coupling
    G03724814Courtesy of MAZDA MOTORS CORP.
  3. Pull on the connection to make sure it is fully engaged.
  4. Connect the battery ground cable. For additional information see BATTERY DISCONNECT .
About FixVault