FixVault
Home › Mazda › 2005 › 3 i, Automatic › Repair and Diagnosis › Engine Performance › Engine Control Systems › Mass Air Flow (MAF) Sensor Inspection › Circuit Open/Short Inspection › Notes

Circuit Open/Short Inspection: Notes

  1. Disconnect the PCM connector. (See PCM REMOVAL/INSTALLATION )
  2. Disconnect the MAF sensor connector.
  3. Inspect the following wiring harnesses for an open or short circuit. (Continuity inspection)
    Fig 1: Identifying MAF Sensor Connector
    G03636132Courtesy of MAZDA MOTORS CORP.
    Fig 2: Identifying Main Relay Connector
    G03636131Courtesy of MAZDA MOTORS CORP.
About FixVault