FixVault
Home › Mazda › 2005 › 6 s, 4D Hatchback, Automatic › Repair and Diagnosis › Body & Frame › Door Locks › Security System And Locks System › Inner Handle Removal/Installation

Inner Handle Removal/Installation

  1. Remove the front door trim.
  2. Using a flathead screwdriver, press and hold the tab in the direction indicated by arrow (1), and remove the shaft by pulling it in the direction indicated by arrow (2).
    Fig 1: Removing Inner Handle
    G03645396Courtesy of MAZDA MOTORS CORP.
  3. Pull off the inner handle, and remove the door lock knob cable and inner handle cable.
  4. Install in the reverse order of removal.
About FixVault