FixVault
Home › Mazda › 2005 › 6 s, 4D Hatchback, Standard › Repair and Diagnosis (Single Page) › Accessories & Equipment › Steering Column Switches › Lighting System › Flasher Control Module Removal/Installation

Flasher Control Module Removal/Installation

  1. Disconnect the negative battery cable.
  2. Remove the instrument cluster. (See INSTRUMENT CLUSTER REMOVAL/INSTALLATION .)
  3. Remove in the order indicated in the table.
    Fig 1: Flasher Control Module Removal Sequence
    G03645586Courtesy of MAZDA MOTORS CORP.
  4. Install in the reverse order of removal.
About FixVault