FixVault
Home › Mazda › 2005 › 6 s, 4D Hatchback, Standard › Repair and Diagnosis › Engine Performance › System › On-Board Diagnostic (Engine Control System (AJ) › After Repair Procedure

After Repair Procedure

  1. Connect the WDS or equivalent to the DLC-2.
  2. Cycle the ignition switch from OFF to ON.
  3. Record DTC if retrieved.
  4. Erase all diagnostic data using the WDS or equivalent.
    Fig 1: Identifying DLC-2 (After Repair Procedure)
    G03643509Courtesy of MAZDA MOTORS CORP.
About FixVault