FixVault

Glove Compartment Removal/Installation

WARNING: This page is about a different car, the 2004 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
  1. Bend the stoppers inward, then remove.
    Fig 1: Removing Glove Compartment Stopper
    G02564007Courtesy of MAZDA MOTORS CORP.
  2. Pull the glove compartment toward you while pushing it downward (1), then remove clip A.
    Fig 2: Removing Glove Compartment
    G02564008Courtesy of MAZDA MOTORS CORP.
  3. Slide the glove compartment toward driver's side door (2).
  4. Install in the reverse order of removal.