FixVault
Home › Mazda › 2005 › B3000 Base, Automatic › Repair and Diagnosis › Steering › Power Steering › Power Steering System › Ignition Lock Cylinder Removal/Installation › Lock Cylinder Functional

Lock Cylinder Functional

  1. Disconnect the negative battery cable.
  2. Insert the ignition key (2) and turn to the RUN position.
  3. Press the lock cylinder release pin (3) while pulling out the lock cylinder.
  4. Install in reverse order of removal.
  5. Verify lock cylinder operation.
    Fig 1: Removing And Installing Of Ignition Lock Cylinder (Lock Cylinder Functional)
    G03730466Courtesy of MAZDA MOTORS CORP.
About FixVault