General Specifications
BRAKE SPECIFICATIONS
| Item | Specification |
|---|---|
| Brake Rotor | |
| Minimum Rotor Thickness 4x2 (Discard Thickness) mm (in) |
24.5 mm (0.96 inch) |
| Minimum Rotor Thickness 4x4 (Discard Thickness) mm (in) |
24.5 mm (0.96 inch) |
| Rotor Maximum Runout mm (in) | 0.076 (0.003) |
| Rotor Maximum Thickness Variation mm (in) | 0.010(0.0004) |
| Brake Pad | |
| Minimum Thickness Above the Metal Backing Plate or Rivets mm (in) |
3.0 mm (0.118 inch) |
| Drum Brake | |
| Lining Minimum Thickness mm (in) |
0.8 (1/32) |
| Brake Drum Maximum Diameter | Molded into the brake drum |
| Brake Pedal | |
| Type | Suspended |
| Master Cylinder | |
| Type | Tandem (with level sensor) |
| Power Brake Unit | |
| Type | Vacuum multiplier, tandem diaphragm |
| Power Brake Unit Push Rod Length mm (in) | 24.89-25.27 (0.980-0.995) |
| Parking Brake | |
| Type | Mechanical two-rear wheel control |
| Operation System | Pedal |
| Brake Fluid | |
| Type | DOT 3 Brake Fluid |