Steering Gear Removal/Installation - 4X2: Installation

To install, reverse the removal procedure.
1. Using the special tool, install new seals on the power steering return hose and power steering pressure hose.
  
  Fig 1: Installing Seals On Power Steering Return Hose And Power Steering Pressure Hose
  Courtesy of MAZDA MOTORS CORP.
2. If necessary, remove the tie-rod ends.
3. The dished side of the washer faces downward.
4. Install a new intermediate shaft pinch bolt.
Fill, purge, and leak check the power steering system.
Check and if necessary, adjust the wheel alignment.