Diagnostic procedure
FAST IDLE/RUNS ON - DIAGNOSTIC PROCEDURE
| STEP |
INSPECTION |
ACTION |
| 1 |
- Connect WDS or equivalent to DLC-2.
- Access ECT PID.
- Start and warm up engine to normal operating temperature.
- Is ECT PID reading between 82-112 °C {180-234 °F}?
|
Yes |
Go to next step. |
| No |
ECT PID is higher than 112 °C {234 °F}:
ECT PID is less than 82 °C {180 °F}:
|
| 2 |
- Connect WDS or equivalent to DLC-2.
- Turn ignition key to ON (Engine OFF).
- Retrieve any DTCs.
- Is "PASSED" displayed?
|
Yes |
No DTC is displayed:
|
| No |
DTC is displayed:
- Go to appropriate DTC test.
|
| 3 |
- Is there air leakage felt or heard at intake-air system components while racing engine to higher speed?
|
Yes |
Repair or replace parts as necessary. |
| No |
Inspect for accelerator cable free play.
(See ACCELERATOR CABLE INSPECTION
.) |
| 4 |
- Verify test results.
- If okay, return to diagnostic index to service any additional symptoms.
- If malfunction remains, inspect related Service Bulletins and/or On-line Repair Information and perform repair or diagnosis.
- If vehicle is repaired, troubleshooting completed.
- If vehicle is not repaired or additional diagnostic information is not available, replace or reprogram PCM.
|