FixVault
Home › Mazda › 2005 › MX-5 Miata Base, Standard › Repair and Diagnosis (Single Page) › Accessories & Equipment › Headlights › Lighting System › Flasher Control Module Removal/Installation

Flasher Control Module Removal/Installation

  1. Disconnect the negative battery cable.
  2. Remove the lower panel.
  3. Remove in the order indicated in the table.
    Fig 1: Removing Flasher Control Module
    G03638954Courtesy of MAZDA MOTORS CORP.
  4. Install in the reverse order of removal.
About FixVault