FixVault
Home › Mazda › 2005 › MX-5 Miata Base, Standard › Repair and Diagnosis › Steering › Power Steering › Power Steering System › Steering Gear And Linkage Disassembly/Assembly › Holder Disassembly Note

Holder Disassembly Note

  1. Cut away the staked area using a drill.
    CAUTION:
    • Carefully pull out the holder without damaging the U gasket.
    Fig 1: Cutting Staked Area Using A Drill
    G03638496Courtesy of MAZDA MOTORS CORP.
  2. Remove the holder.
About FixVault