FixVault
Home › Mazda › 2006 › 3 i, 2.0 F, Standard › Repair and Diagnosis › Body & Frame › Ignition Switch/Steering Lock › Power Systems › Ignition Switch Removal/Installation › Notes

Ignition Switch Removal/Installation: Notes

  1. Disconnect the negative battery cable.
  2. Remove the column cover. (See COLUMN COVER REMOVAL/INSTALLATION ).
  3. Remove in the order indicated in the table.
    Fig 1: Disconnecting Ignition Switch Connector
    G04315470Courtesy of MAZDA MOTORS CORP.
  4. Install in the reverse order of removal.
About FixVault