FixVault
Home › Mazda › 2006 › 3 i, 2.0 F, Standard › Repair and Diagnosis › Restraints › Restraints Control Systems › Seat Belt System › Rear Buckle Removal/Installation

Rear Buckle Removal/Installation

  1. Remove the rear seat cushion. (See REAR SEAT REMOVAL/INSTALLATION ).
  2. Remove in the order indicated in the table.
    Fig 1: Rear Seat Belt Buckle & Torque Specification
    G04314937Courtesy of MAZDA MOTORS CORP.
  3. Install in the reverse order of removal.
About FixVault