FixVault
Home › Mazda › 2006 › 5 Touring, 2.3 L › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System (L3) › Clutch Pedal Position (CPP) Switch Inspection › Continuity Inspection

Continuity Inspection

  1. Remove the CPP switch.
  2. Verify that the continuity between CPP switch terminals A and B is as indicated in the table.
    • If there is no malfunction, perform the "Circuit Open/Short Inspection".
    • If there is any malfunction, replace the CPP switch.
      Fig 1: Identifying Clutch Pedal Position (CPP) Switch Connector Terminals
      G04316082Courtesy of MAZDA MOTORS CORP.
      TERMINALS CONTINUITY CHART

      Measurement condition Continuity
      Push the rod. Continuity detected
      Except above No continuity
About FixVault