FixVault
Home › Mazda › 2006 › 6 Mazdaspeed › Repair and Diagnosis › Engine Performance › System › On-Board Diagnostic [Engine Control System L3 With TC) › On-Board Diagnostic Test › Freeze Frame PID Data Access Procedure

Freeze Frame PID Data Access Procedure

  1. Perform the necessary vehicle preparation and visual inspection.
  2. Connect the WDS or equivalent to the vehicle DLC-2 16-pin connector located on the left side of the center console.
  3. Record the FREEZE FRAME PID DATA using the WDS or equivalent.
    Fig 1: Identifying DL2C Connector
    G04324074Courtesy of MAZDA MOTORS CORP.
About FixVault