FixVault
Home › Mazda › 2006 › 6 Mazdaspeed › Repair and Diagnosis › External Pages › Different car › Section 249 (Emission System) › Evaporative Emission (EVAP) Control System Removal/Installation › EVAP System Leak Detection Pump Installation Note

EVAP System Leak Detection Pump Installation Note

WARNING: This page is about a different car, the 2004 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the bracket on the EVAP system leak detection pump.
  2. Install the connector A.
  3. Install the connector B.
  4. Install the clip.
About FixVault