DTC P2109: Notes
WARNING: This page is about a different variant/trim than selected.
DTC P2109 [AJ] DETECTION CONDITION AND POSSIBLE CAUSES
| DTC P2109 |
TP sensor minimum stop range/performance problem |
| DETECTION CONDITION |
- The PCM monitors the minimum TP when the closed TP learning is completed. If the TP is less than 2.34%
or more than 18.9%
, the PCM determines that there is a TP sensor minimum stop range/performance problem.
Diagnostic support note
- This is a continuous monitor (CCM).
- MIL illuminates if the PCM detects the above malfunction condition during the first drive cycle.
- FREEZE FRAME DATA is available.
- The DTC is stored in the PCM memory.
|
| POSSIBLE CAUSE |
- Throttle actuator malfunction
- Throttle valve malfunction
- PCM malfunction
|