FixVault
Home › Mazda › 2006 › 6 i, 4D Sedan, Automatic › Repair and Diagnosis › Engine Performance › System › On-Board Diagnostic [Engine Control System L3) › After Repair Procedure

After Repair Procedure

  1. Connect WDS or equivalent.
  2. Cycle the ignition switch from OFF to ON.
  3. Record DTC if retrieved.
  4. Clear all diagnostic data by WDS or equivalent.
    Fig 1: Locating DLC-2 Connector
    G04324072Courtesy of MAZDA MOTORS CORP.
About FixVault