DTC P2228: Notes
DTC P2228 DETECTION CONDITION AND POSSIBLE CAUSES
| DTC P2228 |
BARO sensor circuit low input |
| DETECTION CONDITION |
- PCM monitors input voltage from BARO sensor. If input voltage is below 2.1 V , 1.95
, PCM determines that BARO sensor circuit has malfunction.
Diagnostic support note
- This is a continuous monitor (CCM).
- MIL illuminates if PCM detects the above malfunction condition during first drive cycle.
- PENDING CODE is available if PCM detects the above malfunction condition.
- FREEZE FRAME DATA is available.
- DTC is stored in the PCM memory.
|
| POSSIBLE CAUSE |
- BARO sensor malfunction
- PCM malfunction
|